Get quotes from vetted installers
Ready for some quotes? Enter your postcode now Solar Panel Wires And Connectors
Image Credit: “a rat with wings smashing a solar panel, in the style of Banksy” DALL-E & Finn Peacock
Protecting Your Solar From Sky Rats and Other Feral Disasters
I recall the days installing solar panels on a petrol station roof and the distinct feeling we were being watched. Not the CCTV installed to catch petrol thieves, not the nosey neighbour or bored pensioner. It was dozens of beady little eyes observing from all angles, waiting patiently for us to leave so they could move into the new home made of solar panels we’d just built for them.
Although the air conditioning plant already had a bird net, the bean counters didn’t see the advantage in bird-proofing the solar array. I only wish these economic geniuses didn’t just pay but actually had to perform the manual labour involved with cleaning up bird shit and dead pigeons.
It’s a horrible task I wouldn’t wish on anyone. Except a retired LNP government minister.
I recently spoke with the experienced Brisbane-based solar repair expert and all-round top-bloke Julian Saxby. He told this cautionary tale:
“Just be very careful and always wear a mask. I ended up with two different bacterial infections in my lungs after taking down a system very similar to this – it took months to treat as well. The main one was Psittacosis, and somewhere in the mix, I picked up hyperfluous influenzae and moraxella catarrhalis.”
“I spent most nights struggling to breathe. I used to go up the back of the house and just cough non-stop for a solid hour just to clear myself out a bit. These days I can comfortably take down 27 panels and install 20 on a replacement system by myself in a day – but thanks to the pigeons I struggled to get up and down the ladder with a single little 190W panel for quite a while.”
Not only had the roof rusted through…
but this mess had serious health implications.
There are a number of approaches to preventing bird damage:
… none of which appear to be effective in my experience. The best option is to physically exclude them from nesting under the array.
I saw a new roof installed on a heritage-listed stone barn, complete with curved iron sheets as a ridge cap. The building had always been infested with pigeons, which were now barred from entry. The shiny new iron and 35º pitch meant they could land but had no grip on the roof. Wind would send them tumbling, but they came back the next minute.
The fascinating thing was that despite the difficulty, with bloody-minded determination, they soon created themselves a platform… of shit.
After months of pigeon teamwork, a solid platform of guano was stuck to the roof that the pigeons found quite homely. There’s a reason they’re called homing pigeons; they are mind-bendingly dedicated to where they live. Popular or not, I believe that particular problem was only solved by hiring some shooters.
If you know you want to bird-proof your solar array when you are at the quote stage, ask your installer to add bird-proofing up front. It is easier to add it as your solar panels are installed.
A few different commercial products are available in Australia using both plastic and metal, moulded shapes and mesh, and fixed with clips, hooks or ties.
Clenergy even has a video of theirs (on the weirdest roof ever):
Yes, indeed, that is a perimeter of plastic stormwater pipe.
Is there nothing plumbers can’t do?
I’ve seen installs where mesh was screwed or pop-riveted directly to the panel frames. Some installers will wince or throw their hands in the air, but if you consider a PV panel is basically an aluminium framed window, fixing things to them isn’t rocket science, provided you avoid the glass and wiring of course.
A recent problem is with panel makers looking to cut costs, many solar panels no longer have a flange under the short side of the panel. Without that bottom edge to clip or hook commercial designs onto, you have little choice but to carefully drill the frame for fixings to install bird proofing. At least you know that without a flange to put clips on, there is also no wiring clipped to the underside. A mixed blessing for installers, I assure you.
Also, you should check with the panel manufacturer that their warranty is OK with drilling holes in the frame.
Here’s another fact, horrifying for some: there are hundreds of thousands of solar panels in Australia attached to the roof with stainless tek screws driven through the frames. Sometimes the elegant solutions are just simple and effective.
Well-fitted mesh can prevent leaf litter and tree debris from building up under your solar array, which is a major fire hazard, especially for low-pitched roofs.
Cables hanging down soon gather leaves.
Along with the same roof damage and water leak problems that bird waste can create.
Ewww… the things you find under solar that looks fine from the ground.
It also discourages rats who chew wiring and possums, which are just a noisy pain in the backside.
This was an electrifying find thanks to the rats. Image Credit: Solar Depot
And last but not least, keeping corellas and galahs at bay might save the wiring from being chewed, which prevents blowing up your inverter with a catastrophic short circuit to earth.
Yes, that cable has been cleaved off and the wires exposed at the other end. 750 volts DC with a garnish of bird poo.
If your solar installer baulks at fitting mesh to your array, I would get a gutter guard company involved. Have them liaise about electrical safety but leave the mesh to people who have the tools and are used to fitting it neatly without creating leaks.
The bulk of solar installs don’t need bird mesh. Provided the wiring is well restrained and stays tucked up in place, there’s little chance they ever will have a buildup of leaves or wildlife.
If you didn’t have a bird problem before your solar power system was installed, then you are unlikely to need bird deterrents. With that said, if you notice the cooing of pigeons and clap of wings, it really is best to exclude them as soon as possible. Removing solar panels just to clean under them is much more expensive.
Carefully is the answer. Array wiring can have hundreds of volts DC available if there’s any sunlight at all. As many systems have plastic cable ties that grow brittle with age, it’s not unusual for wiring to sag down. Nobody should be poking or hooking that with metal tools.
Do. Not. Use. A. Pressure. Washer.
Unless you are exceptionally talented, it’s too easy to inject water into panel edges or plugs and cause earth faults.
As an example, I had to clean under a 100 kW, 300-panel array on a low-pitch deck roof. Birds weren’t an issue, but a gum tree had filled the roof with leaf litter and sticks. There was a decent clearance under the frame, but the array was 10 metres deep in places with no service gaps.
I made a tool using a heavy-duty plastic scraper attached to a fibreglass rod that could be screwed together to make a looong extension handle (a drain cleaning setup). This meant we could physically push the matted and woven sticks out from under the panels, but it needed to be done regularly to avoid building up a large volume of material that couldn’t be pushed out.
Don’t tell the plumbers we stole their fibreglass rods
A hose or garden blower is handy in many instances but useless in this situation, and I didn’t have a fire hose. The best way to finish the job was with a bucket of water. Twenty litres in one second, sloshed into one channel of the roof, would move much more crud than 20 litres per minute squirting from the hose… but it was still tedious on a big roof.
Hosing didn’t have the oomph. Image credit: Solar Depot
This will be an expensive cleaning job. Image credit: Crap Solar
You could plant a garden in this lot. Image credit: Crap Solar.
Most systems with rain enough to keep them clean should have a 5 yearly check. However, there are systems that need professional cleaning every few months because bird fouling is enough to seriously impact the yield.
So, if your residential roof is attractive to winged pests, a modest investment in bird proofing will increase your energy yield and decrease your cleaning costs.
If you have a commercial solar system, your return on investment is often guaranteed by the solar retailer. Cleaning costs can create arguments, and nobody enjoys arguing about pigeon shit. So, keep an eye on the skies and, ideally, agree on your bird-proofing prevention and maintenance responsibilities before accepting any quotes.
Sign up for our weekly newsletter!
As a child, Anthony marvelled at his Solarex toy helicopter made with shards of smashed solar cells. With some education, he became a jack of all trades & master of several, qualified contractor, builder, roofer, auto and licenced electrician, veteran car restorer & Dad. After 14+ years of lugging, lifting, plumbing and fixing, wiring, dialling and evangelising for everything solar power-related, on-grid and off, he's got a few yarns to share.
We’ve been fairly lucky so far, but it’s a big issue for our neighbours- and they seem loathe to do anything about it.
Usually there are someone in the neighbourhood feeding the bird. try to educate them
We had an issue with pigeons in this area, they loved going under and nesting there. Cue many early mornings listening to the next generation/s of the flying rats.
Our installers did little rolls of bird wire stuffed under the outer edges and that moved them on (to next door …) and we wrote to other houses in the area suggesting they also needed to bird proof their installs.
You used to be able to get pest controllers using a deterrent-soaked grain which would confuse/drug the birds so they didn’t like the area but it is restricted usage now.
I asked the question many years ago as to why the panels are placed so close to the roof. I looked at two aspects namely (1) cooling the panels and (2) debris under the panels which if left will eventually corrode a steel roof necessitating roof replacement. I’m off grid so installed my own panels about 200mm or so off the roof to allow easy cleaning and cooler panels. The bottom rails are down the roof, not across.
Richard, are those upslope array bottom rails on steel decking? That would make each column of panels a separate structure, bridged only by the panels, and able to wobble & vibrate in the wind, as lateral rigidity of clamps on an upslope decking ridge is seriously minimal, I figure.
Would the bottom rails on steel decking _have_to_ be lateral, with adequate rigidity being provided by the many short clamps on a long rail run? The clearance under the bottom rails will then be the roofing tray depth plus the mounting clip working height, 80 or 90 mm total perhaps. It’s not a lot, but enough to lose leaves on a 40 degree roof, I hope.
As I collect drinking water off the roof, steps would be taken (possibly involving pigeon pie) if such aerial rats attempted to construct pigeon poo platforms substantial enough to perch on.
Hi Eric, the panels are supported by raised horizontal section and braced to eliminate movement. I only put panels on my large shed and will never attach anything to the house roof. We only have rain water so clean roofs are important to us.
I had my panels installed in landscape orientation with the rails running up and down the roof so there is no build-up of leaves, etc. It is easy to clean under the 4 rows of panels with a leaf blower. No birds or other vermin have tried to nest under the panels but this could be partly due to predatory birds in the area.
Pesky Possums present a not dissimilar problem. We had one then two, our tile roof echoing their nocturnal mischief – it became intolerable. After much persuasion our patient handyman managed to evict the unwelcome foe and under difficult climatic conditions fitted a flexible wire netting beneath the two arrays. While there have been attempted break-ins the barrier has held strong. Why aren’t installers offering bird and wildlife proofing at time of installation?
We had a problem of pigeons roosting on our corrugated colourbond roof under some old solar PV panels that were replaced about 3 years ago. To stop the pigeons from returning, we had a Roofer climb onto our colour bon roof and attach the bird spikes with silicon. To be precise we used the Saxon Stainless Steel bird spikes (from Bunnings garden area, cost is $43 for a box of 10) on the roof just below the edge of our solar panels. This product has a thick plastic base and is attached to the roof with roof grade silicon.See https://www.bunnings.com.au/saxon-500-x-100-x-110mm-stainless-steel-bird-spike-10-pack_p3040993, Seems to have worked, we have not heard any pigeons roosting under or near our panels.Or perhps they found an easier roof to make their home!
Well is that just one size unit because if it is it won’t work for all the solar panels yes some silicones that are 4 inches off the roof and some that are 6 inches from the roof and as well how’s it going to work if it’s only one size I personally prefer using a Critter guard that goes all the way around the whole entire array of panels.
Just remember it was the humble pigeon that saved countless lives in World Wars 1 and 2. And if it were Wedge Tailed Eagles or fluffy Koalas kipping under their solar panels most people would be literally “cooing” with delight.
Just because the pigeons’ forebears originally came from overseas doesn’t mean we can’t be tolerant, welcoming and accepting of bird diversity. Alternatively, anyone got a recipe for pigeon pie ?
Please keep the SolarQuotes blog constructive and useful with these 4 rules:
1. Real names are preferred - you should be happy to put your name to your comments. 2. Put down your weapons. 3. Assume positive intention. 4. If you are in the solar industry - try to get to the truth, not the sale. 5. Please stay on topic.
Notify me of follow-up comments by email.
Notify me of new posts by email.
Read The Good Solar Guide Free Online!
Get quotes from vetted installers
© 2009 to 2022 Peacock Media Group
Get quotes from vetted installers
Download the first chapter of The Good Solar Guide, authored by SolarQuotes founder Finn Peacock, FREE! You’ll also start receiving the SolarQuotes weekly newsletter, keeping you up to date on all the latest developments on Australia’s solar scene.
Solar Panel Connectors And Cables We respect your privacy and you can opt out from the newsletter at any time.